Applied to Servers, Data-Center Critical network devices, Sensitive electronic equipment, Telecom,Departmental servers,smaller lans,workstation,IPC,Small medical equipment,small precision electronic instrument
Manual Main Features:True on-line double conversion technology with advanced microprocessor control
Wide input voltage range
LCD display
Zero transfer time
Protection against all type of power problems
Self test while start of the UPS
Site wiring fault warning
On-battery power-on function
Smart RS232 communication interface
Intelligent slot available
Sealed lead-acid, maintenance free battery
True Regenerative On Line Uninterruptible Power Supply Design
As new and innovative technologies have become the backbone of today's businesses, maximum system availability is critical and downtime
is more expensivethan ever.Increasingly, businesses need an On Line UPS backup power supply that not only protects against blackouts,
but also virtually eliminates more frequent and subtle power disturbances. Surges, sags, line noise and brownouts can disrupt proper
operation of sensitive equipment. These disturbances may also create unnecessary production, service, and data recovery costs. Must UPS
solves these problems with high quality backup power supply solutions.
A True Regenerative On Line Uninterruptible Power Supply from Must UPS provides the highest level of protection against the widest spectrum of power problems. The incoming AC utility source is converted to a regulated DC voltage. From this DC voltage, a new AC voltage is regenerated, providing continuous, clean, tightly regulated power to your equipment.
Input Power Must Correction
All EH5000 Series UPSMust models include state-of-the-art Input Power must Correction. This greatly reduces the amount of current demanded from your building wiring system, yielding a highly efficient, "building friendly" UPS.
Microprocessor Control
Must power EH5000 Series UPS incorporates advanced microprocessor technology. This technology makes possible a high level of internal UPS controland management. With the supplied software, all EH5000 Series UPS models support unattended shutdown, management, data logging, and self-diagnostics. The software supports MS Windows® 95, 98, NT, 2000, 2000 Server, ME, XP, Novell Netware® 5 & 6, LINUX and FreeBSD. UPSILON for UNIX supports most popular UNIX platforms and OS versions.
SNMP/HTTP Remote Management Support
Our SNMP/HTTP Agent board provides remote management and monitoring over any Ethernet LAN, WAN or the Internet utilizing a 10BaseT-type connection. The optional SNMP/HTTP agent installs via a port located on the back of every EH5000 Series model.
Extended Battery Ready
All EH5000 Series models have continuous duty inverters and support the addition of optional external battery/charger packs. Whether your application requires a few additional minutes or hours, the EH5000 Series is ready.
Frequency Converter Capability
With a factory modification and the addition of an external input transformer, EH5000 Series models can be configured for use as voltage and frequency converters. This makes the EH5000 Series UPS an ideal choice for worldwide power applications.
Model | HC1K(S) | HC1.5K(S) | HC2K(S) | HC3K(S) | |
CAPACITY | 1000 VA/ 800 W | 1500 VA/1200 W | 2000 VA/1600 W | 3000 VA/2400 W | |
INPUT | |||||
Voltage Range | Low Line Transfer | 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % or | |||
80 VAC / 70 VAC / 60 VAC / 50 VAC ± 5 % | |||||
(based on load percentage 100% - 80% / 80% - 70% / 70% - 60%/60% -0) | |||||
LowLine Comeback | 175 VAC ± 5 % or 85 VAC ± 5 % | ||||
High Line Transfer | 300 VAC ± 5 % or 150 VAC ± 5 % | ||||
High Line Comeback | 290 VAC ± 5 VAC or 143 VAC ± 3 VAC | ||||
Frequency Range | 40 Hz ~ 70 Hz | ||||
Phase | Single phase with ground | ||||
Power Factor | ≥0.99 @ 220-230 VAC (input voltage) | ||||
OUTPUT | |||||
AC Voltage Regulation (Bat. Mode) | ±3% | ||||
Frequency Range (Synchronized Range) | 47 ~ 53 Hz or 57 Hz ~ 63 Hz | ||||
Frequency Range (Bat. Mode) | 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz | ||||
Current Crest Ratio | 3:1 | ||||
Harmonic Distortion | <= 3 % THD (Linear Load) | <= 4 % THD (Linear Load) | |||
<= 6 % THD(Non-linear Load) | <= 7 % THD(Non-linear Load) | ||||
Transfer Time | AC to DC | Zero | |||
Inverter to Bypass | 4 ms (Typical) | ||||
Waveform (Bat. Mode) | Pure Sine Wave | ||||
EFFICIENCY | |||||
To AC Mode | 85% | 88% | |||
To Battery Mode | 83% | ||||
BATTERY | |||||
Standard Model | Battery Type | 12 V / 7 AH | 12 V / 9 AH | 12 V / 7 AH | 12 V /7 AH |
Numbers | 3 | 3 | 8 | 8 | |
Typical Recharge Time | 4 hours recover to 90% capacity | ||||
Charging Current (max.) | 1.0 A | ||||
Charging Voltage | 41.0 VDC ± 1% | 102.1 VDC ± 1% | |||
Long-run Model | Battery Type/Numbers | Depending on the capacity of external batteries | |||
Charging Current (max.) | 4.5 A | ||||
Charging Voltage | 41.0 VDC ± 1% | 102.1 VDC ± 1% | |||
INDICATORS | |||||
LCD Panel | UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions | ||||
ALARM | |||||
Battery Mode | Sounding every 4 seconds | ||||
Low Battery | Sounding every second | ||||
Overload | Sounding twice every second | ||||
Fault | Continuously sounding | ||||
PHYSICAL | |||||
Standard Model | Dimension DXWXH (mm) | 397 X 145 X 220 | 421 X 190 X 318 | ||
Net Weight (KGS) | 13 | 14.5 | 31 | 33 | |
Long-run Model | Dimension,DXWXH (mm) | 397 X 145 X 220 | 421 X 190 X 318 | ||
Net Weight (KGS) | 6.5 | 14 | |||
OPERATING ENVIRONMENT | |||||
Humidity | 20-90 % RH @ 0- 40°C (non-condensing) | ||||
Noise Level | <45dB @ 1 Meter | ||||
MANAGEMENT | |||||
Smart RS-232/USB | Supports Windows®98/2000/2003/XP/Vista/2008,Windows®7,Linux,and MAC | ||||
Optional SNMP | Power management from SNMP manager and web browser |