Thermostatic Cooling Adapter Extend using life and Maintain the reliability for Xbox360
\r\nHigh-Efficiency Snap-on Cooling Device
\r\n
\r\nLower working temperature at least 10°C , extend using life of Xbox360
\r\nAuto Temperature Sensor ,cooling fans will be on/off automatically
\r\nPower from Xbox360 directly , no extra A/C adapter needed
\r\nSnap-on type , easy to set up and remove
\r\nRelease high temperature rapidly through 2 large cooling fans
\r\nWith Auto / Manual power switch for cooling fans
\r\n
\r\nSPECIFICATION :
\r\nPower : DC 12V , 330 MA
\r\nFan : 60 x 60 x 15 mm x 2 pcs
\r\nNoise Level : 25 Db max.
\r\nAir Flow : 25 CFM
\r\nFan Speed : 4000 rpm
\r\nDimension : ( WxLxH)
\r\nWeight :
\r\n
\r\nINSTALLATION
\r\n1. Make sure your Xbox360 is turned off and the power cord is disconnected from the outlet. If the console was previously connected to your TV, please temporarily detach the AV plug from the back of the console.
\r\n2. Align the thermostatic fan male plug into the Xbo360 power port and guide the upper security pins into the opposing air vent holes( Fig.1- 1). Please do not use excessive force.
\r\n3. Gently press the thermostatic fan and console together until the security pins at the top lock into the air vent holes and the edge of the Cooling Adapter is pressed against the back of the console. (Fig.1- 2).
\r\n4. Attach the Xbox 360 power cord into the female power port on the Cooling Adapter. (Fig.1-3).
\r\n5. Attach the Xbox 360 power adaptor to a power outlet.
\r\n6. Attach the Xbox 360 AV cable to the appropriate port on the back.
\r\n7. Power up the console first, then slide the ON/OFF switch to “Auto” position of the Cooling Adapter. The fans will automatically start to run when the temperature of the console rise to xx degrees. (Fig.4).
\r\n8. The Cooling Fans will not stop when your console is powered off , until the temperature is decreased .
\r\n
\r\nREMOVAL
\r\n1. Make sure your system is turned off and the power cord is not connected to the outlet. If the console was previously connected to your TV, please temporarily detach the AV plug from the back of the console.
\r\n2. Disconnect the box 360 in place, squeeze the top of the Cooling Adapter in order to release the security pins from the console’s air vents (Fig. 2-1). Now hold the Cooling Adapter at the bottom and gently pull it out of the Xbox 360’s power port (Fig. 2-2). Please do not use force, as this may damage both units.
\r\n
\r\n
\r\nXbox360 is a register trade mark of Microsoft Corporation .
\r\nThis product is not designed , manufactured , sponsored or endorsed by Microsoft