Application:

Pure copper transformerinside and pure copper DC terninal port outside

Durable construction for long life under extreme environmental conditions

Applied in the field of industrial process controls, battery charging requirements, personal computers, telecommunications and others.

Manual Main Features:

Built-in starting control circuits for two- and three-wire generator starting systems
Simplified controls with a snap-on cover that protects settings from being accidentally changed
Better thermal performance allows full output power to 50°C (122°F) without de-rating
High surge capacity starts more difficult loads and handles overload conditions reliably
Durable powder coated, corrosion resistant steel chassis
70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance

Specifications:

MODEL		230V Models
OUTPUT
Power Levels crated at nominal inputs		1KW;2KW;3KW
Output Voltage		220V/230V/240V Selectable
Voltage Waveform		Pure Sine wave
Crest Factor		3:'1
Output Frequency		Auto Select for 50/60Hz,47Hz ~55Hz for 50Hz nominal,56Hz ~ 65Hz for 60Hz nominal
(Synchronized to Mains)
efficienly(DC mode)		>80%
Surge Rating		3000VA / 6000VA / 9000VA
Capable of motor		1kw/2kw: 1HP 3KW:2HP
Transfer time		10ms typical
protection		Over load protection, battery over voltage & under voltage protection
		Oover temperature protection
		short circuit protection
INPUT
Nominal Voltage		220V/230V/240V Selectable
Input Frequency		40Hz ~ 80Hz, 50/60Hz auto-sensing
Efficiency (line mode)		>95%
Noise Filtering		Full time EMI/RFI filtering
Voltage Range		155Vac-265Vac
Charge current		65A max.
Inverter main features		huge charge current
		pure copper transformer
		pure sine wave
		supports inductive loads
Surge Protection		1KW-3KW:430 Joules
BATTERY
Battery type		Lead-Acid 50Ah~500Ah (Recommended)	Lead-Acid 50Ah~500Ah (Recommended)
DC Voltage		1KW:12Vdc	2KW:12Vdc
		2KW:24Vdc	3KW:12Vdc
		3KW:24Vdc	3KW: 48Vdc
Typical backup time		up to external battery
Charging method		battery charger (bulk, absorption, and float)
		charge current is ajustable 25% 50% 75% 100% (optional)
Maximum charging current		1000W 12V:35A	2000W 12V:65A
		2000W 24V:35A	3000W 12V:65A
		3000W 24V:45A	3000W 48V:25A
Average charging		Quick charging mode:15.7V-54V maximum.
voltage for each battery		Trickle charging mode:13.5V -52V
Protection		Over current protection
		Over charging voltage protection
		When temperature inside the unit is over 45°C ,charger will stop charging for 2 minutes followed by an 2 minutes charging. The cycle will be repeate
Monitoring		RS232 communication port
		remote control cable 10 meters
SOLAR CHARGER
Rating voltage		12V / 24V / 48V
DC input range		12V model : 12 ~ 21Vdc;24V model : 24 ~ 42Vdc;48V model : 48 ~ 84Vdc
Charging method		Constant voltage with current limiting by PWM control
Charging voltage		12V model:13.5Vdc;24V model: 27.0Vdc;48V model: 54.0Vdc
Power rating		12V model : 1000W/2000W (13.5Vdc @ 37A)
		24V model : 1000W/2000W (27.0Vdc @ 37A)
		48V model : 3KW/4KW/5KW/6KW (54Vdc @ 18.5A)
Protection		DC input polarity protection, DC input short circuit protection.
		(when battery is connected), DC output over current protection.
COMMUNICATIONS & MANAGEMENT
Control panel		LCD&LED indicators
Audible alarm		Alarm on battery:Low battery & Battery over voltage
		Alarm on abnormal operation:Over load, Short-circuit, & Over heat
Green mode function		1% to 14% of full load
(Auto-shut-off in blackout)		The default setting is OFF.
Cooling fan control		Auto on / off, controlled by temperature & operation mode
ENVORMENT AND SAFETY
Operating Temperature		Up to 1500 meters:0°C to 40°C (32°Fto 104°F)
Transit/storage Temp.		-15°C to 55(5°F to 131°F)
Relative Humidity		5 - 95% non condensing
Operating Altitude		0 ~ 3000 meters
Quality control system		ISO 9001
PHYSICAL
Appearance	Size(mm)LxWxH	570*315*300mm
	Weight(Kg)	1000W/19kg ;2000W/24kg ;3000W/28kg