Application:

Applied in the field of industrial process controls, battery charging requirements, personal computers, telecommunications, graphics displays, plating and gold recovery industries and wherever required in the commercial, telecoms, mining or industrial markets.Commercial Solar, Recreational Vehicles, Mobile Office, Industrial Wind, Boats, Truck, & RV Residential Solar, Emergency Vehicles, Residential Wind, Fleet & Utility Vehicles, Camping & Outdoors, Renewable Newsletter.

Manual Main Features:

70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance
Pure copper transformerinside and pure copper DC terninal port outsideDurable construction for long life under extreme environmental conditions

Specifications:

MODEL		230VModels
OUTPUT
Power Levels crated at nominal inputs		4KW;5KW,6KW
Output Voltage		220V/230V/240V Selectable
Voltage Waveform		Pure Sine wave
Crest Factor		3:'1
Output Frequency		Auto Select for 50/60Hz,47Hz ~55Hz for 50Hz nominal,56Hz ~ 65Hz for 60Hz nominal
(Synchronized to Mains)
Regulation (Nominal)		±20% typical of nominal voltage
Regulation		±3% of selected output voltage (adjustable with the
(Battery mode)		remote set-up software)
Transfer time		10 ms
protection		Over load protection
		Over current protection
		Over temperature protection
INPUT
Nominal Voltage		220V/230V/240V Selectable
Input Frequency		40-80Hz, 50/60Hz auto-sensing
Efficiency (line mode)		95%
Noise Filtering		Full time EMI/RFI filtering
Max bypass overload current		40A
Voltage Range		155V ~ 265V
Product Features		huge charge current
		pure copper transformer
		pure sine wave
		supports inductive loads
Charge current		current is adjustable 25% 50% 75% 100%
BATTERY
Battery type		Lead-Acid 50Ah~500Ah (Recommended)	Lead-Acid 50Ah~500Ah (Recommended)
		4KW/5KW/6KW: 24Vdc /48Vdc optional
Typical backup time		up to external battery
Charging method		battery charger ( bulk, absorption, and float)
		over charge protection
Maximum charging current		4000W 24V: 65A5000W/24V: 65A
		5000W 48V: 40A	6000W 48V: 50A
Average charging		Quick charging mode:15.7V-54V maximum.
voltage for each battery		Trickle charging mode:13.5V -52V
Protection		battery over-voltage & under voltage protection
		over temperature protection
		overload & short circuit protection
Monitoring		RS232
		remote control
SOLAR CHARGER
Rating voltage		24V / 48V
DC input range		24V model : 24 ~ 42Vdc;48V model : 48 ~ 84Vdc
Charging method		Constant voltage with current limiting by PWM control
Charging voltage		24V model: 27.0Vdc;48V model: 54.0Vdc
power rating		48V model :4KW/5KW/6KW (54Vdc @ 18.5A)
Protection		DC input polarity protection, DC input short circuit protection
		(when battery is connected), DC output over current protection
COMMUNICATIONS & MANAGEMENT
Control panel		LCDdisplay & LED indicators
Audible alarm		Alarm on battery:Low battery & Battery over voltage
		Alarm on abnormal operation:Over load, Short-circuit, & Over heat
Green mode function		1% to 14% of full load
(Auto-shut-off in blackout)		The default setting is OFF.
Cooling fan control		Auto on / off, controlled by temperature & operation mode
ENVORMENT AND SAFETY
Operating Temperature		Up to 1500 meters:0°C to 40°C (32°Fto 104°F)
Transit/storage Temp.		-15°C to 55(5°F to 131°F)
Relative Humidity		5 - 95% non condensing
Operating Altitude		0 ~ 3000 meters
Quality control system		ISO 9001
PHYSICAL
Appearance	Size(mm)LxWxH	755*319*288
	Weight(Kg)	4000W/38kg ;5000W/49kg ;6000W/49kg