Main Features:

Maximum talking range 100/500 meters between two riders, real two- way wireless communication between three riders by Bluetooth system

Up to 120Km working speed

Up to 7 hours talking time

Safe auto-receiving cell phone calls

Advanced A2DP & EDR Bluetooth profile

Stereo music/audio function (transmits from A2DP enabled cellphone/ FM radio MP3/ GPS)

Wind noise DSP cancellation

Water-resistance, all weather, Friendly for gloves

MP3 connection and FM radio

Additional Entertainment features:

* Embedded FM Radio

* Connection to an MP3 player (cable included)

* To other V1 or V2 Headsets – Communicate in parallel with up to two other headsets

OTHER FEATURES

·Digital Signal Processor (DSP) Technology for wind noise cancellation

·Excellent performance at speeds up to the legal limit with a full face helmet

·Easily mounts to all full face and open face helmets

GENERAL FEATURE

·Up to 7 hours talk time when connected to your cell phone

·UP to 7 hours time when listening to music

·Typical current consumption is 55 ~75 mA

·100/500 mAh Li Polymer battery ·Standby time: 100 hours

·Charging time: 3~ 6-hours

·Chip brand: CSR

SPECIAL FEATURE

·All weather, rain and snow resistance

·Removable headset unit from the helmet

Introduction

We will describe this communications kit as B (Bluetooth headset) I (intercom) M (music)

This BIM can either be used for rider or for pillion.

This BIM can connect with four Bluetooth devices: a Bluetooth enabled cell phone, two BIM (two riders or one rider and one pillion), an audio source which with a built in or a external audio Bluetooth transmitter.

This BIM is a multifunctional device for motorcyclists and skiers, it can be used:

1)As a handsfree Bluetooth headset for cell phone calls

While out riding or snow skiing, the auto answer feature of the internal Bluetooth profile enables safe automatic Handsfree answering of the phone call automatically. It also offers a call rejecting function.

—receive the cell phone calls even you do not need to press any button, you just need to rider your bike as normal, the process of receiving call will be automatic, after ring on of the call about 5 seconds; it will receive the call automatically. It also can offer rejecting call function.

2)As a two way wireless full duplex interphone between riders or between rider & pillion

The Maximum communication range over a high clear line of sight path can reach 100/500m

328/1640ft! (This maximum range is not guaranteed).

Typical effective range in city is approximately 300m/950ft. Please note that actual range will depend on weather conditions, terrain, presence of obstacles, i.e. a large vehicle, buildings non line of sight etc.

Unlike a one-way walkie talkie, which is only half duplex i.e. it can not speak and listen simultaneously, the BIM offers real-time talking like a normal telephone.

It can connect with two other riders or connect with anther rider and his/her pillion.

The rider can chose which person to talk with

The working speed can be up to 120Km!

3)As a wireless Bluetooth music receiver and speaker, this BIM has EDR and A2DP profile , with EDR and A2DP profile it can offer another important function--- listening to stereo music from A2DP enabled cellphone,MP3 or navigation audio information from GPS(this MP3 or GPS should has a built in audio Bluetooth transmitter)

4)If your MP3, GPS did not have a built in audio Bluetooth transmitter, you only need to have a external audio Bluetooth transmitter (sometimes called an AV Dongle, you can find it easily in the market) to pair with them, then you also can enjoy this added functionality.

5)As the speakers of your MP3/GPS

If your MP3 or GPS is not Bluetooth transmitting enabled and you have not a Bluetooth AV dongle, the BIM also offers another method of listening to the stereo music/audio info--- the simple wired method. Plug the audio source directly into the BIM headset via the 3.5 mm stereo connection

6) FM Radio operations

This product is equipped with high-quality FM radio receiver. This section will explain how to use the FM radio function. When you do not use sound or any other audio source,you can listen to FM radio.

Listening to the radio, you do not have to worry that you will not receive the call. When a call comes in or when you want to call, Bluetooth FM radio will automatically turn off and routed to Bluetooth intercom headset; when the call ends, the Bluetooth radio will automatically back to radio mode.

Turn on FM radio

In standby mode (whether mobile phones or cars on the car phone), turn on FM button will turn on FM radio. It will be the last time channel that you listen to at last.

Turn off FM radio

Listen to the radio, press FM button will turn off FM radio.

Switching the current radio channel

Listening to the radio, press the volume button + or the volume button - until you hear the next channel . Choose the last channel by pressing the volume button +, choose the next channel by pressing the volume button -. when the channel is found, the search stops and listen to your favorite channels. Long press the volume keys to adjust the volume.