single-phase 1000VA RJ45/11  AVR

Rated power:1000VA
Input voltage range:140~280Vac
Output voltage range :200~250Vac±5Vac
Output frequency:Same as AC
Output wave form:Same as AC
PROTECTIONS:Over current, surge protection
Unit dimension (mm):417*136*90
Environment of performance:Temperature 0℃~40℃, Humidity 20%~90%
Noise level :Less than 40dB
RJ45/11 & USB:Yes

Product Description:
       This AVR is a single-phase high-precision automatic exchange regulator, the regulator has a with high precision,
no waveform distortion and maintenance simple, reliable operation and so on; at the same time with network
protection modules, with an output delay function. Full plastic structure, stylish appearance.
  
Applications:
      Applied to computer network equipment, household appliances, test and measurement equipment, office peripheral equipments.
  
Features:
1, the use of advanced micro-computer digital control can ensure a stable AC output in high or too low momentary voltage.
2, can effectively suppress and purification of high-voltage transient spikes and high frequency noise signals.
3, with a variety of protection, safe and reliable.
      3.1 high and low voltage protection
      When the mains input voltage exceeds its normal operating range, power supply is automatically cut off the output; when the input voltage returns to normal operating range, power supply automatically resume output.
      3.2, over frequency, under frequency protection
      When the input frequency is higher than 70Hz or below 40Hz, automatically cut off the power supply output.
      3.3, network protection (optional)
      Optional RJ45 network protection module. Exclude surge on the network, ADSL broadband line terminal equipment, such as ordinary Modem \ ADSL etc, to ensure continuous data transmission.
      3.4, short circuit / overload protection
      3.5, overtemperature protection
      When the temperature of the power transformer is higher than the set value, automatically cut off the power supply output.
4, the delay output (optional)
      And electrical equipment according to customer requirements, to achieve output delay function boot. This is achieved by increasing the push-button switch, when pressed normal output, the default is 5 minutes.