MG-1167 Cat.5E STP Keystone Jack
Pass-thru Keystone Jack
Shielded Keystone Jack
2. 1) Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
2) Meet TIA/EIA TSB-40
3) Meet ISO/IEC Generic Cabling Standard 11801
4) Meet CENELEC Generic Cabling Standard EN50173
3. Electrical:
1) According to UL 1863
2) Current rating: 1.5 Amp Max.
3) Voltage rating: 150 Volts
4) Contact resistance: 20 m-ohm
5) Insulation Resistance: 500M-ohm
6) Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
4. Materials:
1) Housing: PC UL94V-0
2) IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
3) PCB: FR4 1.6mm(0.04") thickness, 2 layers
4) Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.
Meets FCC parts 68
ANS, TIA, EIA-568B
ISO, IEC 11801
ETL verified EIA/TIA T568B: Cat.6 channel link
Transmission performance
Physicals:
IDC connector accept 22-26 AWG solid wire
Jack wiring: 50-micron inch gold plate over 100-micron inch nickel
Housing: high impact flame retardant plastic UL94V-0 rated
IDC connector suitable for 110 punch down and Krone tool
Mechanical:
Plug insertion life: 750cycle/minute
Plug retention force: 30lbs/minute
Electrical:
Current rating: 1.5A
Insulation resistance: 500M Ohms minimum
Contact resistance: 20 Milli-ohms maximum
DC resistance: 0.1 Ohms maximum
Data transmission rates up to 250Mbps