核准

審查

製作

John

Jason

Sqk

CUSTOMER’S PARTNUMBER

APPROVED DATE

APPROVED SIGNATURE

CONTENT

COVER FAN（Drawing）------------------------appendix1

1.0一般規格（General Specification）------------page3

2.0主要材料/零件（Main Materials

/parts Specification）--------------page4

3.0電性規格（Electrical Specifically）---------page4

4.0環境測試（Environmental Specification）-----page5

5.0 风压&风量（Performance Curves）-------------page5

6.0说明书（Specification）----------------------page6 7.0警告(Warning on product safety)--------------page7

8.0風扇圖面 [Fan Drawing 12038G***]-------------page8

1.0一般規格（General Specification）

4.0環境測試（Environmental Specification）

5.0 风压&风量（Performance Curves）

TEST CONDITION: INPUT VOLTAGE--RATED VOLTAGE

TEMPERATURE--ROOM TEMPERATURE

HUMIDITY--HUMIDITY

SPECIFICATION

!WARNING ON PRODUCT SAFETY

01.We can not guarantee our products if your application exceeds the limitations mentioned in our specification

.

02.Please check the safety of your product carefully when installing into your machine .

1. Check the safety of the motor in compliance with the application standard of your machine.
2. Check the safety of the motor performance in error use under the installed situation,and also check the safety by reliability test.

If problem occurred,please report it to us before the shipment of your machines into the market.

03.This motor is not equipped with a thermoprotector such as thermo fuse ,or current-fuse or thermo protector.

There may be smoking,ignition or electric shock by insulation degradation in cases of motor lock ,motor lead short circuit, over load, over voltage or other failure.

Please add the protection circuit on your machine.

04.This product has no alarm signal when the motor is locked.

Make the proper design to your product against the motor lock.

05.Please do not touch the live and rotation parts during operation. There may be struck by electricity or injury.

06.Please be careful when handling the product.

07.If you hit or drop this product,the product may be damaged. Please be careful when handling and installing this product.

08.Please do not injure this product including coil and lead wires when installing or wiring.There may be smoking or fire.

09.If a certain item is not mentioned in the specification and you think it is mecessary to discuss the item, please advise us in advance.Otherwise we will consider there is no specification problem and start shipment as per our specification.

IMPORTANTHANDLINGPRECAUTIONS

01.Please do not touch or push fan blade with fingers or any other object . Fan blade and bearings may be damaged and a noise defect may result.

                                                                   ’ TOUCH!            DON’TPUSH!

02.Do not exert excessive force on the back of the fan when applying adhesive mounting tape. Fan blade extends beyond the front face of the frame.

03.Do not lay the fan face down on a flat surface to apply adhesive mounting tape.

Allow a space for the clearance of the blade.