Cable Solar Cable Solar Panel 4mm² MC4 50m

Description
High-quality single-core cable for photovoltaic installations with a soft tinned multi-core conductor, with insulation and sheath made of cross-linked halogen-free plastic. The cable meets the stringent requirements of PN-EN 50618 and PN-EN 60228 standards, and also has a very high reaction to fire class - Dca (competitive cables have a lower Eca class).

The presented cable has been produced especially for solar applications. It can be used both inside and outside buildings.

The expected service life is 25 years.

Nominal and nominal: 0.6 / 1kV AC
Working voltage: 1.5kV DC, in accordance with EN 50618
Voltage test: 4000V
Flexible conductor made of tinned copper wires
Low emissivity and toxicity of fumes (LSOH)
Very good resistance to UV radiation, ozone and weather conditions
Low water absorption
Very good mechanical properties
Increased resistance to hydrolysis, ammonia, acids and bases
Working temperature: -40 ° C to + 90 ° C (+ 120 ° C / 20,000h)
Reaction to fire: class Dca (PN-EN 13501-6: 2019)
Standards: PN-EN 50618: 2015-03, PN-EN 60228: 2007
Service life: 25 years

Application:
The cable can be used in solar energy production, in solar cells and in solar panel systems. Perfect for use in photovoltaic installations, including for connections between individual photovoltaic panels and between panels and the inverter.

The cables are resistant to UV radiation and very durable in our weather conditions. They can be used inside and outside buildings, in power plants on the roofs of buildings, as well as in large ground-based power plants.

Cable construction:
Coating: cross-linked halogen-free plastic
Insulation: halogen-free cross-linked plastic, white color
Conductor: flexible strand, made of tinned soft copper wires, class 5 according to PN-EN 60228, DIN VDE 0295
Cable solar cable solar panel 4mm MC4 50m Wire cross-section 4 mm²
Technical parameters:
Rated voltage: 0.6 / 1kV AC
Working voltage: 1.5kV DC, compliant with EN 50618
Insulation resistance: 1000 MΩ / km
Test voltage 50Hz: 4000V
Nominal cross section of the conductor: 4.00 mm²
Cable outer diameter: 5.35 mm
The largest permissible wire diameter in the strand: 0.31 mm
Nominal wall thickness of the insulation: 0.7 mm
Nominal wall thickness of the coating: 0.8 mm
Insulation resistance min at 20 ° C: 580 MΩ.km
Min insulation resistance at 90 ° C: 0.58 MΩ.km
Minimum ambient temperature for permanently installed cables: - 40 ° C
Maximum core temperature during cable operation: + 90 ° C
Maximum core temperature during cable operation: + 120 ° C / 20000h
Current carrying capacity: tested in accordance with EN 50618
Ozone and weather resistance: tested in accordance with EN 50618
UV resistance: tested in accordance with EN 50618
Flame resistance: according to DIN EN 60332-1, LSOH
Reaction to fire: PN-EN 13501-6: 2019, class Dca