HBC.HBC-P(HBC-DF-A) high reliability

SKU: FS00019609

Reproduction is welcome and allowed for free circulation only.

General (HBC.HBC-P(HBC-DF-A) high reliability )

At present, the power energy source is still lack in our country, the power is often cut off in some areas, it causes a lot of electrical appliance can ’ t be applied normally. Microcomputer system, communication department, store, hospital and alarming system where requires the power supply is on all the time, hence, our factory specially develops HBC. SPC series high reliability and full automatic inverte r. The product employs reliable import integrated circuit as control core, using M C U as central processor for 2 K V A and above units. reliable, high efficiency and high speed MOSFET as power device, traditional anti - impact power frequency transformer with fine performance as step - p element. It shows rapid response , strong anti - interference, stable output frequency and voltage as well as inversion charge integrated design for inverting and charging , when the commercial power is off, the inverter automatically switches into the inversion state of battery power supply , and when commercial power is on, it automatically the output commercial power and with automatic battery charing management function. This inverter has the function of battery over-voltage protection , adjustment of charge current , unde voltage protection of battery during discharging, over - load protection and so on. It works individually for 24 hrs/ day without worrying about power interruption.

Technical specification(HBC.HBC-P(HBC-DF-A) high reliability )

Output rated power	100~5000VA	Charge input voltage	220V or 110V
Instantaneous peak power	2 times of rated power VA (t≤1S)	Emergency holding time	Depend on battery capacity and load power. The calculation formula as follows:
output voltage	220V or 110V	Inversion emergency time (H)	Battery capacity (AH) =----------------------------×0.75 Discharge current (A)
output frequency	50Hz or 60Hz	Under-voltage protection	DC9.5V-10.0V/DC12V
output waveform	Corrective sine wave (PWM square wave)	Over-charge protection	DC14.8V-15.2V/DC12V
Applicable load	Resistive load and capacitive load, not suitable for inductive load and capacitor step-down power supply

Under-voltage protection and over-charge protection of battery with other specifications are multiplied according to 12V.

Model & Spec (HBC.HBC-P(HBC-DF-A) high reliability )

Model	tline size(cm)	Model	tline size(cm)
HBC-100VA/12V~48V	230×240×160	HBC-P2000VA/12V~48V(Horizontal type)	570×220×190
HBC-200VA/12V~48V	230×240×160	HBC-P3000VA/24V~48V（Horizontal type）	700×280×190
HBC-300VA/12V~48V	250×270×200	HBC-P4000VA/36V~48V（Horizontal type）	710×290×240
HBC-500VA/12V~48V	250×270×200	HBC-P5000VA/36V~48V（Horizontal type）	710×290×240
HBC-800VA/12V~48V	290×300×170	HBC-P2000VA/12V~48V（Vertical type）	400×240×430
HBC-1000VA/12V~48V	290×300×170	HBC-P3000VA/24V~48V（Vertical type）	400×240×430
HBC-1500VA/12V~24V	340×330×195	HBC-P4000VA/36V~48V（Vertical type）	400×280×460
HBC-1500VA/36V~48V	340×330×195	HBC-P5000VA/36V~48V（Vertical type）	400×280×460

Write your own review

Review title:

Review text:

Rating:

My account | Log out

HBC.HBC-P(HBC-DF-A) high reliability

Product reviews for HBC.HBC-P(HBC-DF-A) high reliability