Application:

EH 9115 seriesprovides maximum protection for vital ‘mission-critical' networks, security applications (electro-medical) and industrial applications thanks to its outstanding mechanical and electrical design. The UPS has an extremely outstanding mechanical and electrical design: isolation transformer on the inverter, high short-circuit current and sinusoidal absorption with low THDi.

Manual Main Features:

High accuracy and reliability due to the double DSP control system
low power consumption up to 94%
cold start directly and smart operation for users.
simple to install:capability to install the UPS into any distribution system (neutral not required on rectifier input)
capability of regulating the output voltage (to offset voltage drops down long cable runs)
built-in automatic and manual battery test feature, battery deep discharge protection and temperature compensating charger
back-feed protection: to avoid energy feeding back into the mains supply should a fault occur
reliable, filtered, stabilized and regulated sine wave output (double conversion on-line technology )with filters for atmospheric

disturbance suppression- high reliability, full microprocessor control with no-break static and manual bypasses,extremely high short-circuit

current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation

transformer on the inverter output- maximum reliability and power availability- high level diagnostics: event log with messages, status,

measurements and alarms - available from the built-in LCD in several languages

Specifications:

MODEL		EH9115-10K	EH9115-20K	EH9115-30K	EH9115-40K	EH9115-60K	EH9115-80K
CAPACITY		10KVA/8KW	20KVA/16KW	30KVA/24KW	40KVA/32KW	60KVA/48KW	80KVA/64KW
INPUT
Voltage		380/400/415 Vac±20%,3 Phase +N (3 phase and 4 wire)
Input Frequency		50/60 Hz ±10%
Power Factor		>=0.95
phase		3phase
Input voltage protection		Electronic Input out of tolerant protection
OUTPUT
AC Voltage Regulation (Batt.Mode)		380/400/415 Vac ±1%,3 Phase +N
Voltage tolerant		(balanced load:+/- %1)(unbalanced:+/- %2)(full load:+/-%5)
Voltage regulation time		After full load: 25 ms
Frequency Range		50Hz (60Hz special product)
Frequency tolerant		(synchron:+/-%2) (free running:+/-%0,2)
Efficiency (100% load)		>85%		>90%
Harmonic Distortion		<=3% THD (Linear Load),<=5% THD(Non Linear Load)
Transfer Time	AC to DC	Zero
	Inverter to Bypass	4 ms (Typical)
Waveform (Batt. Mode)		Pure Sine Wave
Crest faktor		3:1
BATTERY
Battery Type & Numbers		Maintenance free lead-acid batteries / 12V x 32pcs
charge current		8A
Battery Start		Yes, UPS can be started without AC source.
Battery protection		Automatic circuit breaker
Battery voltage protection		Electronic 3 level alarms
OVERLOAD
Overload protection		(>130-%150 load :60 seconds ) (>%150 load :30 seconds)
Short circuit protection		Electronic protection
Output voltage protection		Electronic out of tolerant protection
PHYSICAL
Dimension, D X W X H (mm)		600x550x1250			780x700x1520
Net Weight (kgs)		200	270	330	360	430	500
OPERATING ENVIRONMENT
Humidity		0% - 90% (NonLCCondensing)
Temperature		0 – 40°C
Overtemperature protection		Electronic protection
Noise Level		< 58 dBA (At 1 M)		< 63 dBA (At 1 M)
Altitude		<1000 M Above Sea Level
LED,LCD,Buzzer		YES
MANAGEMENT
Remote Control		Dry contact, RS232
. All specifications mentioned above are subject to change without prior notice.