4 mm² 1000V Solar Cable for MC4 Photovoltaic Installations

Description
Black solar cable 4 mm² 1m

High-quality single-core cable for MC4 photovoltaic installations, with a soft tinned multi-core conductor, with insulation and sheath made of cross-linked halogen-free plastic.
The cable can be used in solar energy production, in solar cells and in solar panel systems.

For use in photovoltaic installations, among others for connections between individual photovoltaic panels and between panels and the inverter.

The cable meets the requirements of the following standards:
PN-EN 50618: 2015-03
PN-EN 60228: 2007.
The cable has been manufactured for solar applications.

It can be used both inside and outside buildings.

Technical data:
Rated voltage: 0.6 / 1kV AC
Working voltage: 1.5kV DC, compliant with EN 50618
Insulation resistance: 1000 MΩ / km
Test voltage 50Hz: 3500V
Nominal cross-section of the conductor: 4.00 mm2
Cable outer diameter: 5.5 mm
The largest permissible wire diameter in the strand: 0.31 mm
Nominal wall thickness of the insulation: 0.7 mm
Nominal wall thickness of the outer shell: 0.8 mm
Insulation resistance min at 20 ° C: 580 MΩ.km
Min insulation resistance at 90 ° C: 0.58 MΩ.km
Working temperature: -40 ° C to + 90 ° C (+ 120 ° C / 20,000h).
Maximum core temperature during cable operation: + 120 ° C / 20000h
Current carrying capacity: tested in accordance with EN 50618
Ozone and weather resistance: tested in accordance with EN 50618
UV resistance: tested in accordance with EN 50618
Flame resistance: according to DIN EN 60332-1 and PN-EN 13501-6: 2014, LSOH
Black colour,
Flexible conductor made of tinned copper wires,
High resistance to UV radiation, Low water absorption
Very good mechanical properties.

1 piece = 1 m
Cable structure:
Outer shell: cross-linked halogen-free plastic,
Insulation: cross-linked halogen-free plastic,
Core: flexible line, made of soft tinned copper wires.