Application:

It is suitable in industrial equipment and instruments,armarium,computer network,elevator and the overall regulated power supply in small enterprise.Servers, Data centers, Sensitive electronic equipment, Telecom...

Manual Main Features:

reliable, filtered, stabilized and regulated sine wave output (double conversion on-line technology) with filters for atmospheric disturbance suppression

high reliability: full microprocessor control with no-break static and manual by-pass

high level diagnostics: states, measurements and alarms - available from the built-in LCD

power factor correction with sinusoidal input to ensure a low impact on the mains supply (UPS input power factor, close to 1) for the single-phase/single-phase series

very low noise level <40dB(A)

low power consumption (“Economy Mode”, Smart Active Mode, and Standby/Off Mode to increase efficiency up to 98%)

simple to install:

easy to position (integrated castors)

built-in automatic and manual battery test feature

auto restart on mains return (programmable - software or from the front panel)

back feed protection as standard: to avoid energy feeding back into the mains supply

integrated automatic and manual by-pass.

Specifications:

MODEL		EH9115 2K	EH9115 3K	EH9115 6K	EH9115 10K	EH9115 15K
CAPACITY		2KVA/1.6KW	3KVA/2.4KW	6KVA/4.8KW	10KVA/8KW	15KVA/12KW
INPUT
Voltage		Single phase 220Vac -20% +35%
Voltage Range		-15% +25% or -30% + 40% (Input adding AVR function)
Input Frequency		50Hz or 60Hz +/- 5%
OUTPUT
AC Voltage Regulation		Single phase 220Vac +/- 5% (adjustable)
Voltage regulation		+/-1%
Frequency Range		50Hz or 60Hz
Frequency Stability		+/- 0.5% (Free Running)
Power Factor		0.8
Transient Response		+/- 3% (100% load variation)
Overload Capacity		120% load 30 seconds, >150% constant power.
Transfer Time(AC to DC)		Zero
Waveform		Sinewave THD < 3% at 0-100% linear load
Crest ratio		3:1
Efficiency (AC to AC)		>85%
BATTERY
Battery Type		Maintenance free lead-acid batteries
DC Voltage		48VDC		192VDC
Charger		5A charger build in ,option 10Acharge
PROTECTION
Battery		Battery low shutdown and breaker
Overload protection		125% 30sec. switch to bypass line & automatic re-transfer
Short circuit protection		Current Limited and cut-off and fuse and breaker
UPS Fault		Bypass, load supplied from mains less than 2ms.
Cooling		Force ventilation
PHYSICAL
Dimension, D X W X H (mm)		210x500x530		305x585x740/ 380x680x950
Net Weight (kgs)		52	58	62	95	214
OPERATING ENVIRONMENT
Humidity		20-90% non-condensing
Temperature		0-40 degree C; 32-104 degree F
Noise Level		Less than 45dB(at 1 meter)
INTERFACE
Contact Closure		Support MEGATEC RUPS UPS monitoring software/SNMP
RS-232		Support MEGATEC RUPSII / UPSilon 2000 monitoring software