HBR1 series motor power supply

SKU: FS00019582

Reproduction is welcome and allowed for free circulation only.

General(HBR1 series motor power supply)

The soft starting technology of AC squirrel-cage motor has been applied for many years in the developed country, it has successfully solved the following problems during AC motor starting: supply voltage quality affected by large starting
current, high power consumption of power supply circuit, impact on mechanical equipment. HBR1 series full digital soft starter adopts advanced 16
digits single-chip microcomputer as the core to controlthyristor of high power, it has obvious functions like soft starting, current-limit starting, full voltage
starting, double-ramp starting, soft starting and so on, besides, it has over current protection, overload protection, phase failure protection,etc, its all parameterscan be set automatically according to loads . Its output voltage rises as per setting regulation, to make the controlled motor get full voltage from setting value. After the starter finishes starting, it will bypass the thyristor,
and let AC contactor begin to work. HBR1 series soft starter covering 5.5~500kw, is widely applied to various fields like metallurgy, petrol, chemical
industry, construction, cement, mining, environmental protection and so on, it is the best new generation productinstead of star delta starter, reactor starter and auto step-down starter.

Features(HBR1 series motor power supply)

● With 16-digit single-chip microcomputer, full digital automatic control.
● Starting torque, current, voltage and time can be set flexibly according to different loads.
● Provide motor with smooth and gradual starting course, reduce the impact on power grid from starting current
● The starting current can be adjusted according to loads.
● The character of soft stopping is helpful for prolonging the life of electric contact and satisfying the machinery
requirements on different occasions.
● With over current protection, overload protection,phase failure protection and so on, it can preventthe motor and equipment being damaged effectively.
● External control interface provided is convenient foruser to realize interlocking or self-control.
● Delay the input of starting control and soft stoppingcontrol. Starting delay relay outputs, fault relayoutputs.
● Stop and operate soft stopping freely, the time ofsoft stopping is adjustable.
● Novel product structure, small volume, reliableperformance, convenience for installation andoperation.
● The isolation of double power supply is good forprotecting control part against interference ofkinds of strong electricity.

Pump (HBR1 series motor power supply)

No water pressure fluctuation in the pipe: the soft starter can solve the problem that there is some fluctuation of
water pressure in the pipe when water pump motor starts or stops, its starting current can be down to 1/3~1/4
time. Besides, the current peak value can be eliminated during star delta starting.

Fan (HBR1 series motor power supply)

The belt can't skid: soft starter can prevent the belt skidding and can reduce the stress of bearing when the fan
starts.

Air compressor,centerifuge,agitator(HBR1 series motor power supply)

Air compressor, centrifuge, agitator
For reducing stress of machines: the soft starter can reduce the stress on gear box and driving belt when
compressor, centrifuge and agitator starts.

Conveying belt(HBR1 series motor power supply)

Conveying belt
The soft starter can take effect on preventing product falling down or being damaged when the conveying belt
starts or stops, and it also can reduce the belt abrasion and stress on the gear box for skidding of belt when
starting, its hydraulic coupling can take the place of direct coupling.

Common performanch(HBR1 series motor power supply)

Common performance
For reducing starting current: over high starting current will result in the falling of power grid voltage, subsequently,
it causes the interference to the load of weak power grid. Soft starter can solve above problem, the area of cable
and the size of fuse will get small correspondingly, so the installation cost can be reduced. Reduce starting current
can be good for reducing electricity expense.

Description about control terminal(HBR1 series motor power supply)

Terminal mark	terminal name	Descrition
CM	Contact input common terminal	Common terminal of contact input signal
RUN	Starting input terminal	Motor begins running when RUN-CM switches on
STOP	Stopping input terminal	Motor begins stopping when STOP-CM breaks
OE1,2,3	External fault input terminal	Motor stops immediately when OE-CM breaks
JRA、B、C	Running output signal	JRA-JRB is the NO contact,JRB-JRC is the NC contact
JMA、B、C	Alarming output signal	JMA-JMB is the NO contact,JMB-JMC is the NC contact

General data(HBR1 series motor power supply)

● Time of stopping falling: 0~60S
● Limit of starting current: 50~400%
● Time of starting to rise: 0~100s
● Overload current: 50~300%
● Rated power supply: three-phase 380V
● General motor:7.5~500KW
● Environment temp.: -10℃~55℃
● Initial voltage: 40-380V
● Initial time: 0~20S

Spec.&model	Power(KW)	Over size(mm)				Installation size (mm)		Weight(kg)
Spec.&model	Power(KW)	A	B	C	D	E	F	Weight(kg)
HBR1-S-17KW	17	328	234	224	288	305	184	17
HBR1-S-22KW	22	328	234	224	288	305	184	17
HBR1-S-30KW	30	328	234	224	288	305	184	17
HBR1-S-37KW	37	410	278	223	370	390	150	17
HBR1-S-45KW	45	410	278	223	370	390	150	17
HBR1-S-55KW	55	410	278	223	370	390	150	17
HBR1-S-90KW	90	1957	670	580	1900	460	570	110
HBR1-S-115KW	115	1957	670	580	1900	460	570	110
HBR1-S-130KW	132	1957	670	580	1900	460	570	110
HBR1-S-160KW	160	1957	670	580	1900	460	570	110
HBR1-S-200KW	200	1957	670	580	1900	460	570	110
HBR1-S-250KW	250	1960	800	660	1900	550	645	150
HBR1-S-320KW	320	1960	800	660	1900	550	645	150
HBR1-S-400KW	400	2260	1100	800	2200	800	700	200
HBR1-S-500KW	500	2260	1100	800	2200	800	700	200

Spec.&model	Power(KW)	Over size(mm)				Installation size (mm)		Weight(kg)
Spec.&model	Power(KW)	A	B	C	D	E	F	Weight(kg)
HBR1-S-17KW	17	255	286	215	253	305	256	8
HBR1-S-22KW	22	255	286	215	253	305	256	8
HBR1-S-30KW	30	255	286	215	253	305	256	8
HBR1-S-37KW	37	330	390	235	330	300	360	14.5
HBR1-S-45KW	45	330	390	235	330	300	360	14.5
HBR1-S-55KW	55	330	390	235	330	300	360	14.5
HBR1-S-90KW	90	540	430	250	480	510	385	37
HBR1-S-115KW	115	540	430	250	480	510	385	37
HBR1-S-130KW	132	1957	670	560	1900	460	570	37
HBR1-S-160KW	160	1957	670	560	1900	460	570	37
HBR1-S-200KW	200	1957	670	560	1900	460	570	37
HBR1-S-250KW	250	1957	670	560	1900	460	570	37
HBR1-S-320KW	320	1957	670	560	1900	460	570	37
HBR1-S-400KW	400	1957	670	560	1900	460	570	37
HBR1-S-500KW	500	1957	670	560	1900	460	570	37

Entrez votre propre avis

Titre de l'avis:

Texte de l'avis:

Note:

Mon compte | Déconnexion

HBR1 series motor power supply

Avis produit pour HBR1 series motor power supply